China Gold Supplier for Preform Molding - Thin Wall High Speed Injection GH-250 – Beilun
China Gold Supplier for Preform Molding - Thin Wall High Speed Injection GH-250 – Beilun Detail:
Quality control of all externally purchased parts
We are extremely rigorous in the selection of suppliers. 90% of the procurement of hydraulic components and electrical components comes from world-renowned brands. At the same time, for these components, we can promise at least one year of quality assurance.
Wide variety of physical tests
Various physical tests are performed on screws, barrels, wall panels and tie rods. Before performing precision machining, our relevant quality inspectors must check the hardness and flaw detection. At the same time, it will also check whether the hardness is consistent.
Quality control of injection molding machine
This is a QC team that controls the quality of machinery, hydraulics, electronics, etc. Our goal is to become a world-class supplier of injection molding.
| Project |
Project name |
Uint |
GH250 |
|
Injection unit |
SCREW DIAMETER |
mm |
45 |
| INJECITON STROKE |
mm |
225 |
|
| SCREW L/D RATIO |
L/D |
25 |
|
| SHOT VOLUME(THEORETICAL) |
CM3 |
358 |
|
| INJECTION WEIGHT(PP) |
g |
322 |
|
|
oz |
11.36 |
||
| INJECTION PRESSURE |
Mpa |
157 |
|
| DWELL PRESSYRE |
Kg/cm³ |
1599 |
|
| NJECTION SPEED |
mm/sec |
380 |
|
| INJECTION RATE |
cm³sec |
496.5 |
|
| SCREW SPEED |
rpm |
400 |
|
|
clamping unit
|
CLAMP FORCE |
Kn |
2100 |
| OPEN STROKE |
mm |
490 |
|
| SPACE BETWEEN TIE BARS（Ｖ×Ｈ） |
mm×mm |
520×520 |
|
| MAX.MOULD HEIGHT |
mm |
550 |
|
| MIN.MOULD HEIGHT |
mm |
210 |
|
| EJECTOR STROKE |
mm |
150 |
|
| EJECTOR FORCE |
Kn |
61.5 |
|
| EJECTOR NUMBER |
N |
5 |
|
|
others |
MAX.PUMP PRESSURE |
Mpa |
23 |
| PUMP MOTOR POWER |
Kw |
61.8 |
|
| HEATING POWER |
Kw |
15.05 |
|
| MACHINE DIMENSION(L*W*H) |
M×m×m |
5.74×1.45×1.78 |
|
| OILTANK CUBAGE |
L |
300 |
|
| MACHINE WEIGHT（ESTIMATE） |
T |
8.3 |
Product detail pictures:
Related Product Guide:
We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for China Gold Supplier for Preform Molding - Thin Wall High Speed Injection GH-250 – Beilun , The product will supply to all over the world, such as: Madras, Jersey, Algeria, We always insist on the management tenet of "Quality is First, Technology is Basis, Honesty and Innovation".We are able to develop new products continuously to a higher level to satisfy different needs of customers.
By Jenny from Russia - 2017.12.09 14:01
Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!
By Ada from Boston - 2018.12.05 13:53
