Factory For Transfer Moulding Machine - Thin Wall High Speed Injection GH-210 – Beilun
Factory For Transfer Moulding Machine - Thin Wall High Speed Injection GH-210 – Beilun Detail:
Quality control of all externally purchased parts
We are extremely rigorous in the selection of suppliers. 90% of the procurement of hydraulic components and electrical components comes from world-renowned brands. At the same time, for these components, we can promise at least one year of quality assurance.
Wide variety of physical tests
Various physical tests are performed on screws, barrels, wall panels and tie rods. Before performing precision machining, our relevant quality inspectors must check the hardness and flaw detection. At the same time, it will also check whether the hardness is consistent.
Quality control of injection molding machine
This is a QC team that controls the quality of machinery, hydraulics, electronics, etc. Our goal is to become a world-class supplier of injection molding.
|
Project |
Project name |
unit |
GH210 |
|
Injection unit |
SCREW DIAMETER |
mm |
45 |
| INJECITON STROKE |
mm |
225 |
|
| SCREW L/D RATIO |
L/D |
25 |
|
| SHOT VOLUME(THEORETICAL) |
CM3 |
358 |
|
| INJECTION WEIGHT(PP) |
g |
322 |
|
|
oz |
11.36 |
||
| INJECTION PRESSURE |
Mpa |
157 |
|
| DWELL PRESSYRE |
Kg/cm³ |
1599 |
|
| NJECTION SPEED |
mm/sec |
380 |
|
| INJECTION RATE |
cm³sec |
496.5 |
|
| SCREW SPEED |
rpm |
400 |
|
|
clamping unit
|
CLAMP FORCE |
Kn |
2100 |
| OPEN STROKE |
mm |
490 |
|
| SPACE BETWEEN TIE BARS（Ｖ×Ｈ） |
mm×mm |
520×520 |
|
| MAX.MOULD HEIGHT |
mm |
550 |
|
| MIN.MOULD HEIGHT |
mm |
210 |
|
| EJECTOR STROKE |
mm |
150 |
|
| EJECTOR FORCE |
Kn |
61.5 |
|
| EJECTOR NUMBER |
N |
5 |
|
|
others |
MAX.PUMP PRESSURE |
Mpa |
23 |
| PUMP MOTOR POWER |
Kw |
61.8 |
|
| HEATING POWER |
Kw |
15.05 |
|
| MACHINE DIMENSION(L*W*H) |
M×m×m |
5.74×1.45×1.78 |
|
| OILTANK CUBAGE |
L |
300 |
|
| MACHINE WEIGHT（ESTIMATE） |
T |
8.3 |
Product detail pictures:
Related Product Guide:
We often persist with the theory "Quality To start with, Prestige Supreme". We are fully committed to delivering our clientele with competitively priced good quality items, prompt delivery and experienced support for Factory For Transfer Moulding Machine - Thin Wall High Speed Injection GH-210 – Beilun , The product will supply to all over the world, such as: Lesotho, Colombia, Poland, Our production have been exported to more than 30 countries and regions as first hand source with lowest price. We sincerely welcome customers from both at home and abroad to come to negotiate business with us.
By Anna from Haiti - 2018.06.30 17:29
The supplier cooperation attitude is very good, encountered various problems, always willing to cooperate with us, to us as the real God.
By Nicole from Angola - 2017.06.29 18:55
