OEM Supply Eva Injection Machine - Thin Wall High Speed Injection GH-210 – Beilun

Short Description:

Product Detail

Product Tags

Feedback (2)

Our well-equipped facilities and superb good quality control throughout all stages of manufacturing enables us to guarantee total buyer gratification for Silicone Injection Molding Machine, Pet Bottle Making Machine, Plastic Prototype, Trust us, you will find a better solution on car parts industry.

OEM Supply Eva Injection Machine - Thin Wall High Speed Injection GH-210 – Beilun Detail:

Quality control of all externally purchased parts

We are extremely rigorous in the selection of suppliers. 90% of the procurement of hydraulic components and electrical components comes from world-renowned brands. At the same time, for these components, we can promise at least one year of quality assurance.

Wide variety of physical tests

Various physical tests are performed on screws, barrels, wall panels and tie rods. Before performing precision machining, our relevant quality inspectors must check the hardness and flaw detection. At the same time, it will also check whether the hardness is consistent.

Quality control of injection molding machine

This is a QC team that controls the quality of machinery, hydraulics, electronics, etc. Our goal is to become a world-class supplier of injection molding.

Project	Project name	unit	GH210
Injection unit	SCREW DIAMETER	mm	45
	INJECITON STROKE	mm	225
	SCREW L/D RATIO	L/D	25
	SHOT VOLUME(THEORETICAL)	CM³	358
	INJECTION WEIGHT(PP)	g	322
	INJECTION WEIGHT(PP)	oz	11.36
	INJECTION PRESSURE	Mpa	157
	DWELL PRESSYRE	Kg/cm³	1599
	NJECTION SPEED	mm/sec	380
	INJECTION RATE	cm³sec	496.5
	SCREW SPEED	rpm	400
clamping unit	CLAMP FORCE	Kn	2100
	OPEN STROKE	mm	490
	SPACE BETWEEN TIE BARS（Ｖ×Ｈ）	mm×mm	520×520
	MAX.MOULD HEIGHT	mm	550
	MIN.MOULD HEIGHT	mm	210
	EJECTOR STROKE	mm	150
	EJECTOR FORCE	Kn	61.5
	EJECTOR NUMBER	N	5
others	MAX.PUMP PRESSURE	Mpa	23
	PUMP MOTOR POWER	Kw	61.8
	HEATING POWER	Kw	15.05
	MACHINE DIMENSION(LWH)	M×m×m	5.74×1.45×1.78
	OILTANK CUBAGE	L	300
	MACHINE WEIGHT（ESTIMATE）	T	8.3

Product detail pictures:

Related Product Guide:

Always customer-oriented, and it's our ultimate goal to get not only by far the most reputable, trustable and honest supplier, but also the partner for our customers for OEM Supply Eva Injection Machine - Thin Wall High Speed Injection GH-210 – Beilun , The product will supply to all over the world, such as: Jakarta, Mexico, Liberia, We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.

Double Shot Injection Molding